|
|
|
|
GROUP 7 ONE MOTOR RULES Group 7 One Motor Open Race Rules (a) 1 motor per entry only. You must qualify and race with the same motor. All cars will qualify and race in the same condition as they were submitted for tech inspection. All motors, chassis and bodies will be marked with a noticeable Dye or Paint for identification. (b) All cars must be submitted for tech inspection with the same motor you intend to qualify and race. You may not change or remove motors until the completion of the race. You are allowed to re-solder your motor in place if it has come loose during the race only. You must qualify with the same tires you will race. You may not change tires until you have completed the first heat of racing. (c) Changing motors, or any part of the motor, including armatures, springs, brushes, shunt wires, etc... results in immediate disqualification. Only after you have completed the first heat of racing, you may change: Tires, Gears, Axle, Braid, Guide Flag, Lead Wire, and Lane Stickers. (d) 4-minute heats, 3-minutes between heats, glue is allowed. (e) Racing and Qualifying will be on race power only: 14 volts or less. When possible all track power supplies and battery chargers will be turned OFF, Battery power ONLY will be used (f) All rules are per USRA National rules except as noted above. |
